E+E Elektronik Ges.m.b.H. News

The HTM502 sensing module by Austrian sensor manufacturer E+E Elektronik offers a cost-effective solution for humidity and temperature measurement. It is characterized by easy implementation, high accuracy, and reliability. Integration and interchangeability via the I2C interface allow for rapid project implementation. The integrated sensor protection and the mechanically robust enclosure support a wide range of applications. The module is particularly suitable for price-sensitive applications...

Austrian sensor manufacturer - E+E Elektronik is expanding its digital sensing element portfolio to include two new product variants. The HTE301 humidity and temperature sensing element and the TEE301 temperature sensing element offer excellent measurement accuracy and a wide application temperature range from -40 °C to 125 °C (-40 °F to 257 °F). The small 8-pin DFN package with its I2C interface and four individually configurable I2C addresses is ideal for state-of-the-art, dem...

With the Humidity Calculator by E+E Elektronik, complex humidity calculations can be performed easily and in real-time. This free calculation tool works online in any recent browser and can also be installed as an app on smartphones or a PC. Up to 15 humidity-related parameters can be computed with the practical calculation program. In addition, the E+E Humidity Calculator features a separate calculation mode for determining the pressure dew point. Humidity calculation including measurement un...

Austrian sensor manufacturer - E+E Elektronik presents its first digital temperature sensing element in the form of the TEE501. It impresses with a measurement accuracy of up to ±0.2 °C and a wide temperature range. The small DFN enclosure with integrated pull-up resistors facilitates the design-in of the sensing element. The TEE501 sensing element is suitable for temperature measurement in an operating range of -40 °C to 135 °C. Multi-point temperature adjustment as a factor...

The HTP501 humidity and temperature probe by E+E Elektronik is designed for use in drying chambers and other demanding industrial applications. The stainless steel probe offers excellent measurement accuracy and can be deployed in temperatures ranging from -40 to 120 °C (-40 to 248 °F). The measured values are available on the RS485 interface with Modbus RTU protocol. Demanding industrial applications The HTP501 features a rugged IP66 stainless steel enclosure, a high-temperature cabl...

At the SMART Automation in Linz, E+E Elektronik will be presenting a comprehensive portfolio of measuring devices for industrial automation and process monitoring at booth DC-413. The product range includes flow meters for compressed air and gases, dew point sensors, CO₂ measuring devices as well as humidity and temperature transmitters for demanding industrial applications. On the exhibition grounds, trade fair visitors can view the E+E calibration bus and find out about the calibration servi...

The MOP301 immersion probe by E+E Elektronik precisely measures the moisture in transformer, lubrication or hydraulic oils as well as diesel fuel. It is used for preventive maintenance of equipment and machinery. The stainless steel probe can be used in oils up to 120 °C (248 °F) and 20 bar pressure. The measured data for water activity, temperature, and absolute water content are available via the RS485 interface with Modbus RTU protocol. Stainless steel enclosure The E+E humidity se...

The digital humidity and temperature sensing element - HTE501 from E+E Elektronik offers an excellent measurement accuracy of up to ±1.8 % RH incl. hysteresis and ±0.2 °C. The proven E+E sensor coating and the integrated constant current heater ensure a high level of reliability and durability of the sensing element even in harsh, dirty and condensing environments. The DFN enclosure, which measures just 2.5 x 2.5 x 0.9 mm, and the I2C interface enable simple design-in. The sen...

E+E Elektronik announces the unveiling of their new brand identity. From now on, the Austrian sensor manufacturer presents itself with a new corporate design. However, the company is remaining true to its brand promise - ‘your partner in sensor technology’. Innovative products, cooperative relationships and sustainable action – this is what E+E Elektronik has embodied for more than 40 years. The Austrian sensor manufacturer is one of the world’s renowned suppliers of se...

The calibration laboratory of sensor specialist E+E Elektronik has been commissioned by the Austrian Federal Office of Metrology and Surveying (BEV) to provide the national measurement standard (etalon) for CO2 gas concentration. This makes the calibration experts from Engerwitzdorf the highest metrological authority in the country for a further physical quantity following humidity, dew point, and air velocity. As the BEV's designated institute, E+E Elektronik is authorized to perform special...

The EE212 humidity and temperature sensor by E+E Elektronik is suitable for challenging measurement tasks in climate technology, agriculture, and the pharmaceuticals industry. Thanks to the modular probe design the sensing module can be easily replaced directly on-site if needed. E+E sensor coating, the wide choice of filter caps, and the robust IP65 / NEMA 4 enclosure ensure accurate and reliable measurements even under challenging working conditions. Interchangeable Sensing Module The EE212...

The Sigma 05 acts as a sensor hub for E+E Elektronik’s intelligent Modbus probes. It makes it easy to set up a modular sensor platform with up to three probes and five measurands. The Sigma 05 supports E+E sensing probes for CO₂, humidity, temperature, ambient pressure and air velocity, making it suitable for a wide range of applications. The Sigma 05 can centrally manage up to three sensing probes with an RS485 interface and the Modbus RTU protocol. Compatible E+E sensing probes are auto...

The EE680 air velocity sensor by E+E Elektronik is used to monitor the laminar flow in cleanrooms or on safety workbenches. The sensor precisely measures the air velocity up to 2 m/s (400 ft/min) and simultaneously also the temperature. It meets the requirements of Good Manufacturing Practice (GMP) and is therefore ideally suited for the pharmaceuticals, biotechnology, and microelectronics industries. flow sensing element The flow sensing element used in the EE680 is based on the h...

The EE260 humidity and temperature probe is the latest product development for meteorology from E+E Elektronik. Among other applications, this high-precision sensing probe is perfect for reliable weather monitoring in road traffic or at airports. The sensor and probe heating enables precise and continuous humidity measurement even in areas with high humidity levels. Due to its compact design, the EE260 is compatible with commercially available radiation shields. Precise and Continuous The EE2...

The EE072 by E+E Elektronik is a highly accurate humidity and temperature probe for demanding process and climate control tasks. The probe can be used for example in agriculture and livestock farming, the food and pharmaceutical industries, or in clean rooms. The digital interface with the Modbus RTU or CAN open communication protocol facilitates the design-in of the EE072. High Accuracy A wide temperature range of -40 to 80 °C (-40 to 76 °F), the robust IP65 stainless steel or polyca...

Austrian sensor manufacturer E+E Elektronik operates an EN ISO/IEC 17025 accredited calibration laboratory for humidity, dew point, CO₂, air velocity, mass flow, temperature, and pressure at its headquarters in Engerwitzdorf. Accredited calibrations are needed wherever particularly high accuracy of the used measuring instruments is required. The calibration certificates issued confirm the traceability of the measured values to the national standard to comply with globally recognized standards....

The EE872 from E+E Elektronik measures the CO2 concentration up to 5% (50 000 ppm) as well as relative humidity, temperature, and ambient pressure. Additionally, the 4-in-1 probe also calculates the dew point temperature. It is perfectly suited for use in a harsh and aggressive environments, such as agricultural applications. The active pressure and temperature compensation ensure a very high CO2 measuring accuracy. A heated probe version is available for CO2 measurement in high-humidity appl...

With the EE610, E+E Elektronik offers a new sensor for low differential pressure up to ±100 Pa with an accuracy of ±0.5 Pa. Due to selectable measuring ranges and versatile configuration options, the EE610 is suitable for a variety of applications in air as well as in non-flammable and non-aggressive gases. The EE610 is dedicated for medical, pharmaceutical, and clean room applications. For instance, the sensor can measure the differential pressure between clean rooms, surgery roo...