Eurovent News
Eurovent has welcomed one of the pioneering HVACR solution providers, LENNOX EMEA, as a new member. LENNOX EMEA’s membership significantly expands Eurovent’s base, supporting its goal of a level playing field in the industry. With over 60 years of experience in Europe, the Middle East, and Africa, LENNOX EMEA has solidified its position as a trusted provider of HVAC and refrigeration solutions. Distinguished by its three renowned brands - Lennox, Friga-Bohn, and HK Refrigeration - t...
The Eurovent Board of Directors has formally approved Panasonic Heating and Cooling Solutions as the newest Eurovent Corresponding Member during its online meeting on 29 April 2024. Panasonic, one of the pioneers in the heating and cooling sector with more than 60 years of experience, offers cutting-edge solutions designed to optimize comfort and efficiency in residential, commercial, and industrial spaces across the continent, with a focus on innovation and sustainability. Advanced refrigerat...
Global technology and engineering pioneer - Regal Rexnord partners with the region’s HVACR Industry Association, in support of joint initiatives in regulatory development, education, and raising awareness on energy efficiency and sustainability. The decision reinforces Eurovent Middle East’s position as an influential factor in shaping industry standards and providing technical guidance to regional markets. Creating solutions for its clients Established over fifty years ago, Regal...
Eurovent has released its 2024-2029 Manifesto, which means to unlock the potential of the European HVACR industry to contribute to a sustainable future, quality of life, decarbonization, and sustainable growth and employment in Europe. Eurovent Manifesto The Eurovent Manifesto rests on three essential recommendation pillars to policymakers from the European Commission, European Parliament, and 27 Member States for the 2024-2029 legislative term. Frictionless Single Market Firstly, Eurove...
Eurovent has released an Industry Recommendation that provides a methodology to calculate life cycle energy consumption and costs of air handling units. It aims to support the environmental impact assessment of air handling units (AHUs). The ‘Eurovent Recommendation 6/19: Life cycle cost calculation for AHUs’ defines a standardized methodology for calculating the energy demand and the resulting life cycle costs (LCC) of air handling units to estimate the total costs of ownership of...
Uwe Sigloch (Vice President of Global Product Management, ebm-papst) was elected as the new Chairperson of the Eurovent Product Group ‘Fan Technology’ (PG-FANS), during the group’s recent meeting on 21 March 2024 in Warsaw. Uwe Sigloch Uwe Sigloch has several years of experience in the Eurovent Product Group ‘Fan Technology’, where he previously held the position of Vice-Chairperson since 2014. He will solemnly take up the role for the next two years as the only...
Galletti, an Italian-based HVACR manufacturer has joined Eurovent as its newest member. The Eurovent Board announced Galletti’s membership during its online meeting on Tuesday 19 March 2024. chillers and heat pumps Galletti, a family-owned company founded in 1906, manufactures hydronic indoor units, chillers, and air-water and water-water heat pumps. Through its new ‘Open Innovation’ approach, the company develops advanced design solutions for the tertiary and residentia...
The Eurovent Board has welcomed TÜV NORD as its newest Associate Member. The membership approval makes it Eurovent’s eleventh Associate Member, reinforcing the association’s membership base. TÜV NORD is a technical service provider with worldwide activities in validating the safety of products and services in product inspection, testing, and certification. a unique network of experts Founded in 1869 and headquartered in Hanover, the group employs more than 14.000 people...
The Eurovent Product Group ‘Commercial Refrigeration Equipment’ (PG-RDC) has released a new Recommendation on market surveillance for direct sales refrigerators, which presents practical tips to facilitate effective compliance monitoring. This new Eurovent Recommendation 14/7: ‘Market surveillance for direct sales refrigerators’ aims to enhance the enforcement of Ecodesign and Energy Labelling requirements for refrigerating appliances having a direct sales function place...
The Eurovent Product Group ‘Air Curtains and Fan Heaters’ (PG-CUR) has elected Michael Hims (Carver) as its new Chairperson. He will be supported by the newly elected Vice-Chairperson, Xander Van Bree (Frico BV). The election took place during the online Product Group meeting held on 13 February 2024. Michael Hims (European NPD Manager at Carver) will succeed Carsten Dittmar (Commercial Product Area Director at Systemair), who served as the Eurovent PG-CUR Chairperson since October...
The Eurovent Board of Directors recently welcomed DOGU Iklimlendirme, a Turkish HVAC manufacturer, as a Corresponding Member, during its first 2024 Board Meeting on 30 January, at its Headquarters in Brussels. DOGU Iklimlendirme DOGU Iklimlendirme established in 1999 is a Turkish ventilation and air conditioner manufacturer that mainly focuses on seven major product groups: Air Handling Units, Rooftops, Heat/Energy Recovery Units, Air Distribution & Management Products, Air Purifiers, Kitc...
Eurovent warmly welcomes MANDIK as a Corresponding Member. MANDIK is one of Czechia’s major manufacturers of air handling units, industrial heating systems, and firefighting components. MANDIK The family-owned company MANDIK, founded in 1990, supplies its products beyond standard applications, such as healthcare buildings, gigafactories, and various industries, as well as for construction projects such as subways, tunnels, and especially nuclear power plants in many European countries....
The Eurovent Product Group ‘Evaporative Cooling Equipment’ (PG-CT) has released its third version of Recommendation 9/11–2023: Application of Machinery Safety Regulation for cooling towers. It outlines the elements composed in machinery and their importance. Eurovent 9/11 Recommendation The Eurovent 9/11 Recommendation is to be used as a guideline by the manufacturers The Eurovent 9/11 Recommendation is to be used as a guideline by the manufacturers of cooling towers,...
Re/genT B.V. has formally joined Eurovent as its newest Associate Member. The organization specializes in refrigeration, air conditioning, and heat pumps, with an emphasis on green innovations and energy efficiency. Ecodesign requirements Re/genT B.V. has its own R&D and testing laboratory for modern research and development activities. They conduct verification of Energy Labeling and Ecodesign requirements for domestic and commercial refrigerators and freezers, and are actively involved i...
From a longstanding history of collaboration, Mekar's association with Eurovent now extends to Eurovent Middle East. This move presents Mekar as the latest addition to the expanding consortium of industry players uniting to promote the adoption of sustainable technologies. The step underscores the increasing significance of collaboration among industry organizations in addressing HVACR sector challenges and advancing regulations for the Middle East region. high-quality equipment Founded in 19...
During the meeting of the Product Group ‘Liquid Chilling Packages and Heat Pumps’ (PG-LCP-HP) on 21 November 2023 in Milan, Italy, the group participants re-elected Henk Kranenberg as Chairperson and Mariano Covolo as Vice-Chairperson. Henk Kranenberg Henk Kranenberg, Senior Manager at Daikin NV, is an expert in heating ventilation, air conditioning, refrigeration, and building environment, who has more than 30 years of experience in industrial management, business development, and...
CETIAT, a technical center for aeraulic and thermal industries in the French and international industrial ecosystem, has joined Eurovent as its newest Associate Member. Established in 1960, CETIAT is an independent French technical center for the Heating Ventilation, and Air Conditioning (HVAC) industry. HVAC activities It is a reference point to support industrial innovation projects in the areas of ecological and energy transition, decarbonization, indoor air quality, and energy metrology....
Takyeef Factory LLC, one of the major OEM manufacturers of HVACR equipment in the Gulf, has joined the Eurovent Middle East association, driven by its mission on delivering a broad portfolio of premium international products and underlining its commitment to support energy efficiency and sustainability initiatives in the region. Located on 30,000 square meters in the Industrial City of Abu Dhabi (ICAD), Takyeef specializes in the manufacturing of standard and customized HVACR equipment, includi...
Eurovent Middle East has been invited by UNEP to jointly organize two side events during the global climate conference COP28 taking place in Dubai, UAE, from 30 November to 12 December 2023. The side events will consist of a roundtable on technical developments in cooling for hot ambient temperature countries, as well as a panel discussion on certification aspects and capacity building. increased cooling demand Cooling demand is soaring globally, but even more so in high ambient tem...
The Eurovent Product Group ‘Air Handling Units’ re-elected Martin Lenz (TROX) as the group’s Chairperson and Andy Bijmans (Systemair) as its Vice-Chairperson. The election took place during the group’s last meeting in Hinwil. Participants of the Eurovent Product Group ‘Air Handling Units’ (PG-AHU) re-elected Martin Lenz, Head of International Business Development / Head of Research and Pre-Development at TROX GmbH (Germany) as the group’s Chairperson du...
The Eurovent Product Group ‘Air Handling Units’ re-elected Martin Lenz (TROX) as the group’s Chairperson and Andy Bijmans (Systemair) as its Vice-Chairperson. The election took place during the group’s last meeting in Hinwil. Martin Lenz Participants of the Eurovent Product Group ‘Air Handling Units’ (PG-AHU) re-elected Martin Lenz, Head of International Business Development / Head of Research and Pre-Development at TROX GmbH (Germany) as the group&rs...
BDR Thermea Group, a manufacturer of HVAC equipment and solutions for the commercial and residential sectors, has recently joined Eurovent as one of the association’s newest Corresponding Members. HVAC equipment and solutions BDR Thermea Group is a manufacturer of HVAC equipment and solutions. The group’s product portfolio for residential and commercial buildings includes heat pumps, hydrogen boilers, hybrids, combined heat and power solutions, fuel cells, hot water solutions, resi...
Eurovent would like to extend its warm welcome to Airmaster, one of the Danish manufacturers of ventilation units. Their membership was approved during the association’s Board of Directors meeting in September. Airmaster Established in 1991, Airmaster is a manufacturer of decentralized ventilation units with heat recovery. It is one of the market pioneers within decentral ventilation with a primary market focus on school buildings, kindergartens, and some working offices mainly in north...
INFRICO Supermarket has formally joined Eurovent as its newest Corresponding Member. It is one of the pioneering Spanish manufacturers that provides refrigeration solutions in the HVAC sector. INFRICO Supermarket is the new project of the INFRICO Group for commercial refrigeration, dedicated to the world of food retail through the manufacture and sale of refrigerated displays such as remote group and plug-and-play, cold rooms and condensing units, as well as installation and spare parts. It off...
Eurovent has published its first-ever Recommendation on Hybrid Indirect Evaporative Cooling Equipment. The document was developed for the UNIDO Project and is now available for download on the Eurovent website. new Eurovent Recommendation The new Eurovent Recommendation was developed in the framework of the cooperation between Eurovent and the United Nations Industrial Development Organization (UNIDO). Its main objective is to specify the requirements and test methods for Indirect Evaporativ...
IMBAT, one of Türkiye’s major manufacturers of rooftop units, water chillers, and close control units, has been formally approved to join the Eurovent family during a recent meeting of the association’s Board of Directors. Since 1991, IMBAT has been one of Türkiye’s market pioneers in developing solutions in air conditioning and food refrigeration areas by manufacturing energy-efficient products such as rooftop units, cold storage devices, air conditioners, and water...
TÜV SÜD Industrie Service, an independent technical testing organization has been approved to join Eurovent as Associate Member. With this newest member, the Eurovent family has grown into one of the pioneering testing organizations. TÜV SÜD is one of the pioneering international service providers for testing, inspection, and certification. TÜV SÜD Industrie Service's center of competence for refrigeration and air conditioning provides function and performance test...
Eurovent Middle East launched its new HVACR Leadership Academy during a press conference at the Le Meridian Beach Resort and Spa, Dubai Marina, UAE. The Academy is an open platform to bundle course programs for the professional development of HVACR Technicians and Engineers, considered a critical missing link between technology and energy savings in the fight for lower greenhouse gas emissions. certified training courses The initiative will implement certified training courses for engin...
Eurovent Middle East, the region’s HVACR industry association, is set to launch its Leadership Academy and provide certified training to MEP engineers and technicians in a press conference on 03 October 2023, at Le Royal Meridian, in Dubai Marina, UAE. The Leadership Academy will provide focused education and training on products and technologies, including essential information on specifications, regulations, standards, and operation and maintenance practices. Efficient cooling an...
Eurovent is pleased to announce the launch of its new, redesigned website. It features an enhanced user experience with access to exclusive member resources, the latest policy updates, and more. user-centric experience The new website features a streamlined corporate look that caters to easy navigation and access to specific information. The primary goal during the redesign process was to create a more user-centric experience and to focus more on easier accessibility of the required informati...
