American Coolair Corporation News

American Coolair has developed a line of electrically commutated Energy Saver motor powered fans. Energy Saver motors allow for precise control of air movement systems, while operating at a fraction of the cost of conventional permanent split capacitor (PSC) direct drive motors and even belt-drive units. With ability to control the motor manually, and an option to automate control based on system performance, American Coolair’s Energy Saver motors are a compliment to today’s lean b...

American Coolair has named Bobby Graves Jr. as a Sales Representative in the Agriculture Sales Division. In this role, Graves will work with American Coolair customers in the greenhouse, poultry, and dairy industries. Experience and qualification  Bobby Graves Jr. has been with the company since 2017, starting as an Inventory Clerk while attending college. He has worked in the production and assembly departments, as well as in the onsite research and development facility to le...

American Coolair Corp. introduces its mixed flow fan with a direct drive motor. The MXFD combines the high volume flow capabilities of an axial fan and the pressure capabilities of a centrifugal fan. Designed to meet ducted fan needs both economically and efficiently, these fans operate reliably in most environments, including contaminated air. Combined with a VFD, variable frequency drive, the speed of the fan can be changed to match the performance required. less maintenance, long life...

The new VAD fans are available in 12-inch to 48-inch models with an airflow range of 955 to 36,396 cubic feet per minute depending on the size. The high-pressure efficiency permits the fans to be installed anywhere in the ducted system and in any position. Usage The fans can be used in either supply air mode or exhaust mode by simply turning the entire unit to move air in the desired direction. The fans are extremely compact and work well where space is limited. They can be mounted directly...

American Coolair’s new NBC54 3-blade fan provides better performance at higher static pressures. This fan is available in slope and damper door configurations. An energy-efficient fan, the NBC54 has been engineered to meet large volume ventilation needs while keeping energy costs at a minimum. Evaporative cooling systems With three cast aluminum airfoil blades secured to a cast aluminum hub, the fan has a new unique blade design that has been engineered to provide durability, corrosion...

American Coolair has developed the FGBC52-PC fan featuring its new high-density polyethylene (HDPE) cone. HDPE is a high-strength thermoplastic polymer. Because it is lighter than traditional fiberglass and UV, the AMC FGBC52-PC is an economical option for ventilating agricultural buildings when paired with an interior wall shutter. FGBC52PC fan features  The FGBC52PC uses American Coolair’s unique static shaft and bearing housing which allows the blade hub to also serve as the dri...

Featuring epoxy coated galvanized parts and cast aluminum blade assembly and fiberglass panel, American Coolair’s FGXM54 Exterior Mount Fan is designed for use in the broiler market. Exterior Mount Fans mount directly on broiler buildings, eliminating the need for a fan housing. The new FGXM54 Damper Door fans are designed to be mounted over a wall opening. The fans can be installed as part of new construction or to replace existing fans. The fan panel is constructed of reinforced fiberg...

American Coolair offers a Brown Out Kit for open top and closed top evaporative cooling systems. The kit provides substantial light control for poultry buildings and greenhouses and is easily installed on the inside or outside of the building. Brown Out Kits Coolair Brown Out Kits use the Dandy Light Traps to provide a light reduction in a modular aluminum frame. Coolair’s Brown Out kits are designed to fit existing American Coolair evaporative cooling systems and are available as a...

American Coolair has added a FGXM36 to its Exterior Mount Fan Series. Exterior Mount Fans mount directly on farm buildings, eliminating the need for fan housing. The new FGXM36 Damper Door fans are designed to be mounted over a wall opening. The fans can be installed as part of a new construction or to replace existing fans. The fan panel is constructed of reinforced fiberglass and is coated with a U.V. gel coat for long life. Baked on epoxy-coated galvanized structural uprights securely hold t...

American Coolair’s high-velocity FM series Stir Fans for spot cooling, manure drying and general mixing of air in farm houses has been certified by the Bioenvironmental and Structural Systems Lab (BESS Lab), at the University of Illinois. High-velocity FM series Stir Fans Available in 18 and 24 inches, the FM fan line uses direct drive motors for maximum energy efficiency. With the direct drive fans, there is no drive loss and no belts to slip or replace. The FM18 fan features galvanized...

American Coolair has named H.B. Graves as a sales representative in the Farm Sales Division. In this role, Graves will work with American Coolair customers in greenhouse, poultry, and dairy industries. Graves experience Graves has worked throughout the company since 2007 to gain experience and firm knowledge of American Coolair products. He has served as a Test Laboratory Assistant, and worked in Parts Fabrication, Foundry, Industrial Fan Assembly, and Inventory. He studied at the University...

Bryan Rast II has joined American Coolair as a sales representative in the Farm Sales Division. Rast works with American Coolair customers in greenhouse, poultry, and dairy industries. A 2016 cum laude graduate from the University of Florida, he earned a bachelor’s degree in Food and Resources Economics with a specialization in agribusiness management and marketing. In college, Rast served internships with Ranger Pumps and Cal Maine Foods Inc. Evaporative cooling systems Founded in 1928...

Founded by the father and son team of James E. Graves Sr. and James E. Graves Jr., American Coolair Corporation has been a globally renowned manufacturer of ventilation products for 90 years. The family-owned company, which began operation on October 29, 1928 in Jacksonville, Florida, USA, is currently run by Harry Graves Jr., Robert B. Graves and Sara Graves. They are the fourth generation from the Graves family to lead the company. Comprehensive product lines The company designs and builds...