Phoenix Manufacturing PH6802C Side Discharge Evaporative Cooler

Technical Specification

Features:

Make: Phoenix Manufacturing
Model code: PH6802C
Series: Aerocool Pro Series
Weight: 217 lbs
Height: 34 5/16 inches

Additional info:

High quality architectural grade Peblar XT® finish Pro-Armor: The premier single inlet cooler with polymeric inner structure that completely shields the wet section from corrosive interaction. Pro-Series thermostat for fully automatic control. Pro Clean System provides sump dump pump for cyclic dumping of sump water, keeping the cooler free of harmful mineral build up. Galvanized sheet steel is zinc coated at weights rated G40 or G90 Evaporative media used in the UL Listed models is rated to UL900, Class 2 These units are equipped with High Efficiency Rigid Media pads. Evaporative media is corrugated cellulose material, impregnated with insoluble antirot salts and rigidifying saturates. Bearings have an L10 bearing life of 39,000 hours Electrical service knockouts are 1/2". Water supply line is 1/4" O.D. on both sides. Bottom pan drain is 3/4" male hose thread.

Contact manufacturer Contact manufacturer Datasheet Datasheet

Make	Phoenix Manufacturing
Manufacturer	Phoenix Manufacturing, Inc.
Category	Cooling>Evaporative Coolers
Model code	PH6802C
Series	Aerocool Pro Series
Weight	217 lbs
Dimensions	Height: 34 5/16 inches Width: 42 inches Depth: 45 inches
Additional info	High quality architectural grade Peblar XT® finish Pro-Armor: The premier single inlet cooler with polymeric inner structure that completely shields the wet section from corrosive interaction. Pro-Series thermostat for fully automatic control. Pro Clean System provides sump dump pump for cyclic dumping of sump water, keeping the cooler free of harmful mineral build up. Galvanized sheet steel is zinc coated at weights rated G40 or G90 Evaporative media used in the UL Listed models is rated to UL900, Class 2 These units are equipped with High Efficiency Rigid Media pads. Evaporative media is corrugated cellulose material, impregnated with insoluble antirot salts and rigidifying saturates. Bearings have an L10 bearing life of 39,000 hours Electrical service knockouts are 1/2". Water supply line is 1/4" O.D. on both sides. Bottom pan drain is 3/4" male hose thread.
Download PDF version Download PDF version