Johnson Controls DX-6-72-6 Compact Shell And Tube Heat Exchanger

Technical Specification

Features:
  • Make: Johnson Controls
  • Model code: DX-6-72-6
  • Series: FRICK®
  • Application: Commercial
  • Usage: In packaged unit
Additional info:

FRICK® economizers are designed and rated for the specified refrigerant and operating conditions.  All nozzle connections are sized according to industry standard criteria based on the refrigerant and specified operating conditions. FRICK® Coolware software allows custom rating of economizers (except DX economizers) with various refrigerants, nozzle sizing based on maximum vessel capacity or specific capacity and modification of the nozzle locations (within limitations). The FRICK® economizers and components are abrasively cleaned prior to assembly assuring a clean interior and maximum adhesion of the final exterior paint system. The finished vessel is pressure tested to assure the integrity of all welds. It is vacuum dehydrated and charged with a 15 psi nitrogen charge for shipment and storage. This procedure minimizes the potential for internal corrosion prior to being placed into service.

Read more
Make Johnson Controls
Manufacturer Johnson Controls
Category Air Ventilation>Economizers
Model code DX-6-72-6
Series FRICK®
Application Commercial
Usage In packaged unit
Additional info
  • FRICK® economizers are designed and rated for the specified refrigerant and operating conditions. 
  • All nozzle connections are sized according to industry standard criteria based on the refrigerant and specified operating conditions.
  • FRICK® Coolware software allows custom rating of economizers (except DX economizers) with various refrigerants, nozzle sizing based on maximum vessel capacity or specific capacity and modification of the nozzle locations (within limitations).
  • The FRICK® economizers and components are abrasively cleaned prior to assembly assuring a clean interior and maximum adhesion of the final exterior paint system.
  • The finished vessel is pressure tested to assure the integrity of all welds. It is vacuum dehydrated and charged with a 15 psi nitrogen charge for shipment and storage. This procedure minimizes the potential for internal corrosion prior to being placed into service.
Download PDF version Download PDF version
vfd