Frigidaire FSA1BG4MVRN60K 20-SEER iQ Drive® Air Conditioner

Technical Specification

Features:
  • Make: Frigidaire
  • Model code: FSA1BG4MVRN60K
  • Power: 50,000 ~ 60,000 BTU/H
  • Electrical: 208-230/1/60 V/phase/Hz
  • Refrigerant Lines - Liquid/Suction: 3/8 / 7/8 inches
Read more
Additional info:

iQ Drive®: Inverter driven Samsung rotary compressor provides five capacities in modulating operation from a twostage thermostat. Interface Control Board: Two digit LED provides system operation, status and diagnostic troubleshooting information. System Control: Utilizes a patented capacity control algorithm to select the optimum system capacity level. System Protection: Internal controls monitor system operation to protect the inverter drive and compressor. Cooling operating temperature range: 50 °F to 125 °F. Five Minute Restart Time Delay: When the unit shuts down, a delay keeps the unit from restarting, eliminating the highest cause for compressor failure. Compressor and Component Access: Designed to make servicing easier for the contractor, hinge access panels are provided to all controls and the compressor. High Efficiency with the low Sound Levels: 20 SEER with sound ratings of 57-76 depending upon operating conditions. Compressor Sound Blanket: Engineered to significantly reduce unwanted compressor noise. Variable Speed Condenser Motor and Swept-Wing Fan Blade: A heavy duty brushless DC motor for long lasting reliability and engineered to provide quiet operation. Requires no maintenance and is completely protected from rain and snow. Service Port: This port allows the contractor to read the suction pressure in all modes of operation without removing any panels, saving time and increasing serviceability. High Pressure Switch: Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits. Low Pressure Switch: Protects against loss of system refrigerant charge. Liquid Line Filter Drier: Included with unit, field installed. Micro-Channel Coils: All-Aluminum coils are designed to optimize heat transfer, and increase durability and reliability. Composite Base Pan: Absorbs sound and is corrosion resistant. Composite pan is also stronger and lighter than steel. Designed Using Galvanized Steel: With a polyester urethane coat finish, it passes 950 hours of salt spray per ASTM Std. B117. One Piece Top/Orifice: Designed for maximum airflow and quiet operation. Removable Top Grille Assembly: Allows ease of service from the top without disconnecting fan motor leads. Servicer-Friendly Jacket: Side panels can be easily removed and replaced without removing the top grill.

Read more
Make Frigidaire
Manufacturer Frigidaire HVAC
Category Cooling>Split Condensers
Model code FSA1BG4MVRN60K
Power 50,000 ~ 60,000 BTU/H
Electrical 208-230/1/60 V/phase/Hz
Refrigerant Lines - Liquid/Suction 3/8 / 7/8 inches
Refrigerant Type R-410a
Weight 261 lbs
Dimensions Height: 45 inches
Width: 30 1/2 inches
Depth: 30 1/2 inches
Additional info
  • iQ Drive®: Inverter driven Samsung rotary compressor provides five capacities in modulating operation from a two
    stage thermostat.
  • Interface Control Board: Two digit LED provides system operation, status and diagnostic troubleshooting information.
    • System Control: Utilizes a patented capacity control algorithm to select the optimum system capacity level.
    • System Protection: Internal controls monitor system operation to protect the inverter drive and compressor.
    • Cooling operating temperature range: 50 °F to 125 °F.
    • Five Minute Restart Time Delay: When the unit shuts down, a delay keeps the unit from restarting, eliminating the highest cause for compressor failure.
  • Compressor and Component Access: Designed to make servicing easier for the contractor, hinge access panels are provided to all controls and the compressor.
  • High Efficiency with the low Sound Levels: 20 SEER with sound ratings of 57-76 depending upon operating conditions.
  • Compressor Sound Blanket: Engineered to significantly reduce unwanted compressor noise.
  • Variable Speed Condenser Motor and Swept-Wing Fan
  • Blade: A heavy duty brushless DC motor for long lasting reliability and engineered to provide quiet operation. Requires no maintenance and is completely protected from rain and snow.
  • Service Port: This port allows the contractor to read the suction pressure in all modes of operation without removing any panels, saving time and increasing serviceability.
  • High Pressure Switch: Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits.
  • Low Pressure Switch: Protects against loss of system refrigerant charge.
  • Liquid Line Filter Drier: Included with unit, field installed.
  • Micro-Channel Coils: All-Aluminum coils are designed to optimize heat transfer, and increase durability and reliability.
  • Composite Base Pan: Absorbs sound and is corrosion resistant. Composite pan is also stronger and lighter than steel.
  • Designed Using Galvanized Steel: With a polyester urethane coat finish, it passes 950 hours of salt spray per ASTM Std. B117.
  • One Piece Top/Orifice: Designed for maximum airflow and quiet operation.
  • Removable Top Grille Assembly: Allows ease of service from the top without disconnecting fan motor leads.
  • Servicer-Friendly Jacket: Side panels can be easily removed and replaced without removing the top grill.
Download PDF version Download PDF version
Related tags
vfd