Association/regulatory body in United States of America (USA) (239 found)
hybridGEOTABS EU is an active group of developers, engineers & academics with a common interest in optimizing coupled geothermal heat pumps (GEO-HP) and thermally activated building systems (TABS), alongside secondary heating & cooling systems. TABS use pipes, embedded in concrete floors, ceilings and walls, through which warm/cold water is pumped to heat/cool a building’s thermal mass.
IFC Certification Ltd is a UKAS accredited and internationally recognized provider of high quality customer focused independent third party certification. IFC Certification Ltd is also a Notified Certification Body for certificating products for CE Marking under the Construction Products Directive.
Institute of Domestic Heating & Environmental Engineers is the pre-eminent professional body for the approved heating engineer. The prime objective of the IDHEE is to raise the standards of domestic heating installations through education, to which end IDHEE Education has developed the Domestic Heating Design Course, and continues to develop further courses to enhance the knowledge of installers in general and its members in particular.
International Accreditation Forum (IAF) is the world association of Conformity Assessment Accreditation Bodies. Its primary function is to develop a single worldwide programme of conformity assessment, which reduces risk for business and its customers by assuring them that accredited certificates may be relied upon.
The International Environment Agency (IEA) is the global energy authority, providing data, analysis, and solutions on all fuels and all technologies. They help governments, industry, and citizens make good energy choices.
The International Institute of Refrigeration is the only independent intergovernmental science and technology based organization which promotes knowledge of refrigeration and associated technologies and applications on a global scale that improve quality of life in a cost effective and environmentally sustainable manner.
Linear Air Diffusers are specialists in commercial grade aluminum linear slot diffusers, linear bar grilles, and custom plenums. They have been manufacturing air diffusion products such as: Air Grilles, Registers, and Diffusers (GRD’s) for over 40 years. Their business model is based on devoted investments with the use of modern robotics manufacturing, 3D rapid prototyping, computational fluid dynamics simulations (CFD), and BIM.
M&K Heating and Air Conditioning provides home comfort solutions in London and surrounding communities.
Mitsubishi Heavy Industries, Ltd. delivers innovative and integrated solutions across a wide range of industries from commercial aviation and transportation to power plants and gas turbines, and from machinery and infrastructure to integrated defense and space systems.
Ofgem is Britain’s independent energy regulator. Their role is to protect consumers now and in the future by working to deliver a greener, fairer energy system. They are a non-ministerial government department and an independent National Regulatory Authority.
OpenTherm is a non-manufacturer-dependent system of communication between modulating HVAC appliances and room thermostats. It consists of a communication protocol and an interface specification. The OpenTherm communication protocol is primarily designed to control modulating heating appliances. The protocol is available to members of the OpenTherm Association only.
The Passive House Institute (PHI) is an independent research institute that has played an especially crucial role in the development of the Passive House concept - the only internationally recognized, performance-based energy standard in construction.
Air Conditioning in London. Residential and commercial Air Conditioning Installers with 30 Years of Experience in London & Kent. Air Conditioning Installation Contractors - Finance & 5-Year Warranty Available.
Serving over 80,000 customers a year, Pimlico is London's pioneering service company excellent on Trustpilot. Founded in 1979, with over 250 vehicles on London's roads, can respond to customer emergencies in under one hour.
The Retrofit Academy is the driving force in retrofit knowledge and skills: building the supply chain with government, industry & education providers.
As a globally recognized professional body, everything that Royal Institution of Chartered Surveyors do is designed to effect positive change in the built and natural environments. Through their respected global standards, pioneering professional progression, and their trusted data and insight, RICS promotes and enforce the highest professional standards in the development and management of land, real estate, construction, and infrastructure.
RVT Group is not an average hire company, work with to understand the full scope of activities on site before recommending a fully compliant health hazard control solution. Specialist solutions include dust control, noise control, fume control, ventilation, heating and cooling, environmental monitoring, water treatment solutions, and confined space equipment.
The Scottish and Northern Ireland Plumbing Employers Federation (SNIPEF) is the principal trade association for plumbing and heating businesses based in Scotland and Northern Ireland. Since 1923, SNIPEF has represented the best interests of the plumbing and heating industry, from sole traders to large-scale businesses. SNIPEF also manages the training of plumbing apprentices, ensuring a skilled workforce in the future.
Storengy is a subsidiary of the ENGIE Group, which is active in natural gas storage and renewable gas production and storage.
The Sustainable Energy Association are a member based industry body offering innovative policy solutions that link up building-level technologies and the wider energy system to achieve a low carbon, secure energy future for the UK, benefits for UK consumers, and commercial growth for businesses working in the sector.
Synecore was established by Paul Thomas and Adrian Eade to meet what they felt was a market for professional M&E contractors, with in-house expertise in both HVAC and electrical engineering across the UK. Set in the rural Kent countryside purpose-built head office is the hub of nationwide infrastructure. It’s where develop electrical and mechanical plans for some of the UK’s largest roll-out programs for clients such as Leon, Frankie and Benny’s.
The Brick Consortium, Inc. is a non-profit membership corporation whose purpose is to encourage the research and development of Brick Schema Specifications for the built environment and any supporting tooling, documentation, and best practices necessary to promote Brick. The consortium develops the Brick Schema Specifications as open source through member participation.
Thornhvac is a niche recruitment consultancy that prides itself on having a deep understanding of the HVAC industry in the UK.
Founded in 2003, Utilita was created to challenge the Big 6 energy suppliers by empowering everyone with a fair and flexible service that’s good for the pocket and planet.
VDMA is an association that represents the common economic, technical and scientific interests of the mechanical engineering industry, especially towards national and international authorities and business circles.
Vetter GmbH has been a pioneering provider of emergency pneumatics. Specializing in pneumatic rescue equipment and shelters for fire services and medical teams, Vetter combines innovation with a deep understanding of rescuers’ needs. Their commitment to quality and customer-oriented solutions sets them apart, making them the preferred choice for emergency professionals worldwide. In 2004, Vetter GmbH became a trusted partner of IDEX Fire.
Viscofan - The Viscofan Group is the world leader in artificial casings for meat products which it distributes in over 100 countries worldwide. Thanks to the Viscofan Group’s wide range of technologies and its employees' know-how, it offers innovative solutions that are transforming the artificial casings market.
The World Plumbing Council (WPC) is an international organization which aims to develop and promote the image and standards of the plumbing Industry worldwide. World Plumbing Day is an international event on March 11 every year, initiated by the World Plumbing Council as a means of highlighting the important role plumbing plays in the health, safety and sustainability of the community.
Zed-Air Heating and Air Conditioning was established in 1993, by Eric and Cindy Barron. Zed Air is an independently owned and operated company. Zed-Air Heating & Air Conditioning is a local company, and the community is very important and proud to support local charities like the Salvation Army and Mens Mission.
Browse HVAC companies
Upcoming HVAC events in United States of America (USA)

Atlanta Build Expo 2025
- 23 - 24 Jul, 2025
- ATLANTA, United States of America (USA)

Refri Americas 2024
- 25 - 25 Jul, 2025
- Miami, United States of America (USA)

The Battery Show 2025
- 6 - 9 Oct, 2025
- Detroit, United States of America (USA)

International Builders Show 2026
- 17 - 19 Feb, 2026
- Orlando, United States of America (USA)

Austin Build Expo 2026
- 27 - 28 May, 2026
- Austin, United States of America (USA)

DistribuTEC 2025
- 24 - 27 May, 2025
- Dallas, United States of America (USA)

Fastener Fair USA 2025
- 28 - 29 May, 2025
- Nashville, United States of America (USA)

Houston Build Expo 2025
- 11 - 12 Jun, 2025
- Austin, United States of America (USA)

ASHRAE Annual Conference 2025
- 21 - 25 Jun, 2025
- Phoenix, United States of America (USA)

Atlanta Build Expo 2025
- 23 - 24 Jul, 2025
- ATLANTA, United States of America (USA)

Refri Americas 2024
- 25 - 25 Jul, 2025
- Miami, United States of America (USA)

The Battery Show 2025
- 6 - 9 Oct, 2025
- Detroit, United States of America (USA)

International Builders Show 2026
- 17 - 19 Feb, 2026
- Orlando, United States of America (USA)

Austin Build Expo 2026
- 27 - 28 May, 2026
- Austin, United States of America (USA)

DistribuTEC 2025
- 24 - 27 May, 2025
- Dallas, United States of America (USA)

Fastener Fair USA 2025
- 28 - 29 May, 2025
- Nashville, United States of America (USA)

Houston Build Expo 2025
- 11 - 12 Jun, 2025
- Austin, United States of America (USA)

ASHRAE Annual Conference 2025
- 21 - 25 Jun, 2025
- Phoenix, United States of America (USA)

Atlanta Build Expo 2025
- 23 - 24 Jul, 2025
- ATLANTA, United States of America (USA)
Leveraging Radiant And Hydronics To Help Achieve Decarbonization Goals
DownloadSealed Connectors In Harsh Environments
DownloadPowering And Cooling Next Generation Data Centers
DownloadDebunking Myths To Promote A Bright Future For Heat Pumps
DownloadOptimizing Comfort: The Ultimate HVAC Component Guide
Download