Rheem RLPN-A048YM000 Packaged Unit

Technical Specification
Features:
  • Make: Rheem
  • Model code: RLPN-A048YM000
  • Series: RLPN
  • Electrical: 575/3/60 V/phase/Hz
  • Refrigerant Type: R-410a
Additional info:

R-410A HFC refrigerant. Complete factory charged, wired and run tested. Scroll compressors with internal line break overload andhigh-pressure protection. Single stage compressor on all models. (Except 5 ton 15SEER) which utilizes two stage scroll. Convertible airflow. TXV refrigerant metering system. High Pressure and Low Pressure/Loss of charge protectionstandard on all models. Solid Core liquid line filter drier. Single slab, Micro Channel designed evaporator coilfacilitates easy cleaning for maintained high efficiencies. Cooling operation up to 125 degree F ambient. Easily removable filter, blower, gas heat, and compressor/control access panels permits prompt service. Powder Paint Finish meets ASTMB117 steel coated on eachside for maximum protection. G90 galvanized. One piece top cover and one piece base pan with drawnsupply and return opening for superior water management. Externally mounted refrigerant gauge ports for easy servicediagnostics. Factory or field-installed electric heat kits available upto 24 kW. Easy to install plug-in; slip in, 100% fully modulatingeconomizer. Forkable base rails for easy handling and lifting. Single point electrical connections. Direct drive or high performance belt drive motor withvariable pitch pulleys and quick adjust belt system. Permanently lubricated evaporator, condenser and gas heatinducer motors. Condenser motors are internally protected, totally enclosedwith shaft down design. 1 inch filter standard with slide out design. Colored and labeled wiring. MicroChannel coils. Molded compressor plug. Micro Channel evaporator and condenser delivers superiorperformance with less refrigerant charge and less weight thanconventional copper tube/aluminum fin coils. In addition theall aluminum construction has superior protection againstformicary corrosion and aluminum tube rubbing potential. Itseasier to clean and has a more robust surface.

Make Rheem
Manufacturer Rheem Manufacturing
Model code RLPN-A048YM000
Series RLPN
Electrical 575/3/60 V/phase/Hz
Refrigerant Type R-410a
Weight 496 lbs
Additional info
  • R-410A HFC refrigerant.
  • Complete factory charged, wired and run tested.
  • Scroll compressors with internal line break overload and
    high-pressure protection.
  • Single stage compressor on all models. (Except 5 ton 15
    SEER) which utilizes two stage scroll.
  • Convertible airflow.
  • TXV refrigerant metering system.
  • High Pressure and Low Pressure/Loss of charge protection
    standard on all models.
  • Solid Core liquid line filter drier.
  • Single slab, Micro Channel designed evaporator coil
    facilitates easy cleaning for maintained high efficiencies.
  • Cooling operation up to 125 degree F ambient.
  • Easily removable filter, blower, gas heat, and compressor/
    control access panels permits prompt service.
  • Powder Paint Finish meets ASTMB117 steel coated on each
    side for maximum protection. G90 galvanized.
  • One piece top cover and one piece base pan with drawn
    supply and return opening for superior water management.
  • Externally mounted refrigerant gauge ports for easy service
    diagnostics.
  • Factory or field-installed electric heat kits available up
    to 24 kW.
  • Easy to install plug-in; slip in, 100% fully modulating
    economizer.
  • Forkable base rails for easy handling and lifting.
  • Single point electrical connections.
  • Direct drive or high performance belt drive motor with
    variable pitch pulleys and quick adjust belt system.
  • Permanently lubricated evaporator, condenser and gas heat
    inducer motors.
  • Condenser motors are internally protected, totally enclosed
    with shaft down design.
  • 1 inch filter standard with slide out design.
  • Colored and labeled wiring.
  • MicroChannel coils.
  • Molded compressor plug.
  • Micro Channel evaporator and condenser delivers superior
    performance with less refrigerant charge and less weight than
    conventional copper tube/aluminum fin coils. In addition the
    all aluminum construction has superior protection against
    formicary corrosion and aluminum tube rubbing potential. Its
    easier to clean and has a more robust surface.