Designed for Manufactured Housing: Charged with refrigerant for 20 feet of lineset. Full Service Valves on RSA3ME: These brass valves are easily accessible and simplify servicing of the refrigeration system. Quick Connect Fittings on RSA3QE: No brazing or evacuation required, reducing install time. Designed Using Galvanized Steel: A powder- coated paint that eliminates sharp edges and reduces corrosion, fading, chipping and scratching. It passes 950 hours of salt spray per ASTM Std. B117. Composite Base Pan: Absorbs sound and is corrosion resistant. Composite is also stronger and lighter than steel. Permanently Lubricated Motor: A heavy duty PSC motor for long lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Removable Top Grille Assembly: Allows ease of service from the top without disconnecting fan motor leads. High Pressure Switch: Protects against abnormally high system pressures. Auto-reset feature prevents nuisance service visits. Liquid Line Filter Drier: Included with unit, factory installed on QE and field installed on BE models. One Piece Top/Orifice: Designed for maximum airflow and quiet operation Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to all controls and the compressor from the side of the unit. All-Aluminum coils: Aluminum coils in all models which provides high corrosion resistance. Powder Coated Wire Guard and Mesh Hail Guard: Will never rust and protects the coil from being damaged by balls, lawnmowers, hail, etc.
Make | Revolv® |
---|---|
Manufacturer | Style Crest Inc. |
Model code | RSA1BE4M1SN18K |
Power | 15,000 ~ 20,000 BTU/H |
Capacity | 1.5 tons |
Electrical | 208-230/1/60 V/phase/Hz |
Refrigerant Lines - Liquid/Suction | 3/8 / 3/4 inches |
Refrigerant Type | R-410a |
Weight | 123 lbs |
Dimensions |
Height: 28.5 inches Width: 23.75 inches Depth: 23.75 inches |
Additional info |
|