Viessmann Offers Innovative Solutions To Optimize Heating Systems More Quickly

Automatic flow balancing is what finally makes a new heating system perfect. It ensures even distribution of heat in the house and significantly reduces heating and electricity costs, which prevents follow-up costs for a repeat service call.

It would be a clear win, then, to make automatic flow balancing easier and faster, especially in modernization projects. That’s why Viessmann offers two different innovative solutions that enable specialist partners to optimize heating systems more quickly and easily than ever before.

Vitoset Balance Card and ViCare radiator

If a fully digital, automated solution is desired, then installing a ViCare radiator or floor heating thermostat is the right choice. These also offer customers the benefit of controlling the comfort level in each room via the ViCare smartphone app.

If a customer wants only the balancing without the smart devices and digital control, then Viessmann still offers the traditional method via the Vitoset Balance Card.

Necessary to replace boilers as part of the modernization

Vitoset Balance and ViCare radiator and floor heating thermostats do not require calculations for heat demand

Both the German Building Energy Act (GEG) and Part C of the German Construction Contract Procedures (VOB/C) require automatic flow balancing to achieve an optimized overall system without uneven heat distribution and unnecessary energy consumption. This protects both the environment and homeowners’ wallets.

However, especially in older houses, pipe cross-sections and lengths are all too often not known, and determining them is time-consuming and cost-intensive, investment homeowners often don’t want to make. With Vitoset Balance and the ViCare radiator and floor heating thermostats, calculations for heat demand and the pipe network are no longer necessary.

Automatic flow balancing with ViCare radiator or floor thermostats

The installation of ViCare radiator or floor heating thermostats enables fully automatic flow balancing. Both types of ViCare thermostats can be connected to the heat generator via the new Viessmann electronics platform or by using a Vitoconnect interface. This gives users the ability to easily control their heating system via the ViCare app.

To carry out automatic flow balancing via the ViCare thermostats, all existing thermostats must be replaced with the ViCare smart thermostats. The connection to the heat generator or as a standalone system without a heat generator (Vitoconnect OPTO2 required) enables fully automatic flow balancing. Since no adjustable thermostatic valves are required, automatic flow balancing can also be completed very quickly during modernization.

As soon as a set temperature is entered for each room in the ViCare app, the flow temperature is also automatically adjusted.

A maximum of 20 rooms with radiator heating systems can be integrated. The area of application is thus mainly single- and two-family homes. 

Single room control for individual warmth and comfort

The modular concept allows further components to be added at a later date and used via the app

ViCare radiator and floor heating thermostats not only offer automatic flow balancing but also have energy-saving open-window detection and can be controlled via smartphone. Using the free ViCare app, users can set an individual temperature for each room as well as individual time programs.

In addition, the modular concept allows further components (e.g. climate sensors) to be added at a later date and used via the app.

Location services

In the future, the ViCare app will also use location services on request and will be able to detect the distance to the heating system. If a defined distance is exceeded on the way to work or on a trip, the server sends a command to the heating controller to reduce the heat output which reduces costs.

When a homeowner returns, the heating system is started up again following the same principle, making sure the home is warm and comfortable at arrival.

Connection to ViGuide

The automatic connection to ViGuide will also be available shortly. This means that documents required for the funding application can be automatically pre-filled with the stored data.

This makes the process even faster and easier. The system also continuously and independently checks the operating status of the heating system and informs the specialist partner in the event of a fault.

The Vitoset Balance Card: Three simple steps to automatic flow balancing

The Vitoset Balance Card allows the appropriate settings of the valves to be established based on room size and building age.

Automatic flow balancing ensures that the entire heating system, from boiler control and pump output to the system hydraulics, is perfectly matched for partial and full load operation. Uniform supply to the heating surfaces is ensured at all times. The correct flow rate for the respective room size can be easily set on the radiator:

• Place the Balance Card with the notch on the valve.
• Turn the valve with the card and set the existing room size according to the building age.
• Finally, the sum of all valve settings in the individual rooms is transferred to the parameterization of the heating circuit pump, all done. The system does the rest on its own.

Installation

Automatic flow balancing with Vitoset Balance can be used for single- and two-family homes

Automatic flow balancing with Vitoset Balance can be used for single- and two-family homes with radiator heating systems, a building age of 1978 to 2009, and a maximum living area of 300 sqm.

The requirements are the installation of a new Viessmann heater with heat demand-controlled circulation pump and Oventrop Q-Tech valves on the radiators.

Secure government subsidies

Both automatic flow balancing with Vitoset Balance and automatic balancing via ViCare radiator and floor heating thermostats are certified by TÜV-Rheinland and can be supported by BAFA with up to 20 percent of the eligible costs.

Benefits for trade partners