Maytag B6VMMX24K-B Indoor Air Handler

Technical Specification
Features:
  • Make: Maytag
  • Model code: B6VMMX24K-B
  • Series: B6VMMX Series
  • Placement: Indoor
  • Speed: Variable
Additional info:

Energy Efficient Variable Speed ECM Motor: Advanced technology provides 16 field-selectable cooling airflows and automatically sets heating airflows based on the amount of installed heat. Quiet Blower Operation:Extra quiet and smooth blower on and off cycles. Constant airflow: Motor automatically adjusts to different static loads. Reduced air stratification: This results in improved air quality by optimizing humidity removal and filtration capabilities. Multi-poised: Can be used in horizontal, upflow, downflow and vertical applications. Built in Filter Rack:makes theairhandlereasy toservice. Plug-in Heater Kit: Available in 5 kw through 30 kw (Not for use in 115 Volt units) Circuit Board: Incorporating blower time delay relay, low voltage terminal strip, and heat-strip sequencing. Breaker Accessibility:Breakeraccessiblefromthefront of the unit when heater is applied. Plastic Drain Pan: Provides corrosion resistance. Durable Cabinet: Galvanized steel with a polyurethane finish. The finish will endure 950 hours of salt spray and resist corrosion 50% better than comparable units. Designed to meet the requirements 610.2.A.2: Meets Florida building code requirements for air leakage. Thermal Expansion Valve: Factory installed externally equalized thermal expansion valve provides precise refrigerant control under varying load conditions. Cabinet Insulation: 1" insulation with an R-value of 4.2 contributes to quiet operation and prevents cabinet sweating in difficult applications. Anteater MCTM Micro-Channel Coil Technology: All aluminum coil provides high corrosion resistance.

Make Maytag
Manufacturer Maytag Heating and Cooling Products
Model code B6VMMX24K-B
Series B6VMMX Series
Placement Indoor
Speed Variable
Motor Speed 1/2 HP
Weight 105 lbs
Width 19 3/4 inches
Height 43 1/2 inches
Additional info
  • Energy Efficient Variable Speed ECM Motor: Advanced technology provides 16 field-selectable cooling airflows and automatically sets heating airflows based on the amount of installed heat.
  • Quiet Blower Operation:Extra quiet and smooth blower on and off cycles.
  • Constant airflow: Motor automatically adjusts to different static loads.
  • Reduced air stratification: This results in improved air quality by optimizing humidity removal and filtration capabilities.
  • Multi-poised: Can be used in horizontal, upflow, downflow and vertical applications.
  • Built in Filter Rack:makes theairhandlereasy toservice.
  • Plug-in Heater Kit: Available in 5 kw through 30 kw (Not for use in 115 Volt units)
  • Circuit Board: Incorporating blower time delay relay, low voltage terminal strip, and heat-strip sequencing.
  • Breaker Accessibility:Breakeraccessiblefromthefront of the unit when heater is applied.
  • Plastic Drain Pan: Provides corrosion resistance.
  • Durable Cabinet: Galvanized steel with a polyurethane finish. The finish will endure 950 hours of salt spray and resist corrosion 50% better than comparable units.
  • Designed to meet the requirements 610.2.A.2: Meets Florida building code requirements for air leakage.
  • Thermal Expansion Valve: Factory installed externally equalized thermal expansion valve provides precise refrigerant control under varying load conditions.
  • Cabinet Insulation: 1" insulation with an R-value of 4.2 contributes to quiet operation and prevents cabinet sweating in difficult applications.
  • Anteater MCTM Micro-Channel Coil Technology: All aluminum coil provides high corrosion resistance.