Frigidaire B6VMAX30K-A Variable-Speed Air Handler

Technical Specification
Features:
  • Make: Frigidaire
  • Model code: B6VMAX30K-A
  • Placement: Indoor
  • Speed: Variable
  • Motor Speed: 1/2 HP
Additional info:

Energy Efficient Variable Speed ECM Motor: Advanced technology provides 16 field-selectable cooling airflows and automatically sets heating airflows based on the amount of installed heat. Quiet Blower Operation: Extra quiet and smooth blower on and off cycles. Constant Airflow: Motor automatically adjusts to different static loads. Reduced Air Stratification: This results in improved air quality by optimizing humidity removal and filtration capabilities. Multi-Poised: Can be used in horizontal, upflow, downflow and vertical applications. Built in Filter Rack: makes the air handler easy to service. Plug-in Heater Kit: Available in 5 kw through 30 kw. Circuit Board: Incorporating blower time delay relay, low voltage terminal strip, and heat-strip sequencing. Breaker Accessibility: Breaker accessible from the front of the unit when heater is applied. Plastic Drain Pan: Provides corrosion resistance. Durable Cabinet: Galvanized steel with a polyurethane finish. The finish will endure 950 hours of salt spray per ASTM Std. B117. Designed to Meet the Requirements 610.2.A.2: Meets Florida building code requirements for air leakage. Thermal Expansion Valve: Factory installed externally equalized thermal expansion valve provides precise refrigerant control under varying load conditions. Cabinet Insulation: 1" insulation with an R-value of 4.2 contributes to quiet operation and prevents cabinet sweating in difficult applications. AnteaterTM Coil Technology: Copper alloy with zinc additives to stop formicary corrosion

Make Frigidaire
Manufacturer Frigidaire HVAC
Model code B6VMAX30K-A
Placement Indoor
Speed Variable
Motor Speed 1/2 HP
Weight 91 lbs
Width 14 1/4 inches
Height 43 1/2 inches
Additional info
  • Energy Efficient Variable Speed ECM Motor: Advanced technology provides 16 field-selectable cooling airflows and automatically sets heating airflows based on the amount of installed heat.
  • Quiet Blower Operation: Extra quiet and smooth blower on and off cycles.
  • Constant Airflow: Motor automatically adjusts to different static loads.
  • Reduced Air Stratification: This results in improved air quality by optimizing humidity removal and filtration capabilities.
  • Multi-Poised: Can be used in horizontal, upflow, downflow and vertical applications.
  • Built in Filter Rack: makes the air handler easy to service.
  • Plug-in Heater Kit: Available in 5 kw through 30 kw.
  • Circuit Board: Incorporating blower time delay relay, low voltage terminal strip, and heat-strip sequencing.
  • Breaker Accessibility: Breaker accessible from the front of the unit when heater is applied.
  • Plastic Drain Pan: Provides corrosion resistance.
  • Durable Cabinet: Galvanized steel with a polyurethane finish. The finish will endure 950 hours of salt spray per ASTM Std. B117.
  • Designed to Meet the Requirements 610.2.A.2: Meets Florida building code requirements for air leakage.
  • Thermal Expansion Valve: Factory installed externally equalized thermal expansion valve provides precise refrigerant control under varying load conditions.
  • Cabinet Insulation: 1" insulation with an R-value of 4.2 contributes to quiet operation and prevents cabinet sweating in difficult applications.
  • AnteaterTM Coil Technology: Copper alloy with zinc additives to stop formicary corrosion