Performance Features All units are shrink wrapped for complete protection while in transit Maximum deflection ratio of L/240 at 8 in. wg. Casing air leakage rate less than 1% at 8 in. wg. of unit nominal airflow Doublewall panel construction, insulation is sealed between the inner and outer panels Thermal break casing construction Optional factory mounted controls Chilled water, hot water, direct expansion (DX), electric and steam coils Tubular indirect fired gas furnace option with a minimum of 10:1 turndown Ultraviolet band C (UV-C) germicidal lamps Multiple filtration from pleated MERV 8 to HEPA filters Energy recovery ventilator (ERV) sections Multiple fan options Humidifiers for precise indoor climate conditioning Internal and external face and bypass damper sections Reliability Features Optional 18 gauge exterior and/or interior skin Standard insulated, fully drainable, sloped drain pans in galvanized or stainless steel Maintenance Features Optional prepainted and/or galvanized unit exterior Optional aluminum diamond treadplate floors All service may be performed through large, removable or hinged with lockable handle panels Marine lights and viewports for interior component inspection Installation Features Units may be mounted in ceilings, closets, attics, etc. Variable frequency drives are programmed and started up at the factory Casing can be broken-down to individual panels and frame members
| Make | Carrier |
|---|---|
| Manufacturer | Carrier Corporation |
| Model code | 39MN42T |
| Series | AERO® 39M |
| Filters | HEPA |
| Quantity | 21000 CFM |
| Placement | Indoor |
| Width | 80 inches |
| Height | 107 inches |
| Additional info |
Performance Features
Reliability Features
Maintenance Features
Installation Features
|