AAON CB-036 Split condensing units

Technical Specification
Features:
  • Make: AAON
  • Model code: CB-036
  • Series: CB Series
  • Capacity: 3 tons
  • Refrigerant Type: R-410a
Additional info:

Air-cooled condensing unit or a remote air-cooled condenser, from 2-5 tons or 24-60 MBH. Available for split system air source heat pump configurations. Two step scroll compressor, 67% and 100% capacity, includes rubber isolation mounts to minimize vibration. Variable capacity scroll compressor (10-100%) for load matching cooling and heating and improved part load efficiency. Split system modulating humidity control is available to provide energy efficient dehumidification, even with low sensible heat loads, without the temperature swings common with on/off reheat systems. High density foam compressor sound suppression blanket to reduce radiated noise. Polymer e-coated coils are available to extend the life of the coils and protect them in corrosive environments. Adjustable fan cycling or modulating fan pressure control allow operation down to 35°F for facilities that require mechanical cooling at lower ambient temperatures.

Make AAON
Manufacturer AAON, Inc.
Model code CB-036
Series CB Series
Capacity 3 tons
Refrigerant Type R-410a
Dimensions Height: 39 inches
Width: 37 inches
Depth: 31 inches
Additional info
  • Air-cooled condensing unit or a remote air-cooled condenser, from 2-5 tons or 24-60 MBH.
  • Available for split system air source heat pump configurations.
  • Two step scroll compressor, 67% and 100% capacity, includes rubber isolation mounts to minimize vibration.
  • Variable capacity scroll compressor (10-100%) for load matching cooling and heating and improved part load efficiency.
  • Split system modulating humidity control is available to provide energy efficient dehumidification, even with low sensible heat loads, without the temperature swings common with on/off reheat systems.
  • High density foam compressor sound suppression blanket to reduce radiated noise.
  • Polymer e-coated coils are available to extend the life of the coils and protect them in corrosive environments.
  • Adjustable fan cycling or modulating fan pressure control allow operation down to 35°F for facilities that require mechanical cooling at lower ambient temperatures.